Articles
1.
category: Protection against climatic and microbiological degradations
УДК 621.792.053
Petrova A.P.1, Lukina N.Ph.1, I.A. Sharova1, V. M. Bouznik1
Operability of glues and materials on their basisin the conditions close to conditions of the Arctic
The analysis of properties of epoxy adhesives of cold curing, film adhesives of different types and adhesive prepregs with reference to work in the Arctic conditions is provided. Data on water resistance and water absorption of curing film adhesives are provided. Possibilities of use of adhesive bonds are considered at temperature -60°С. Рroperties of composite materials on the basis of adhesive prepregs and change of their properties at operation in weather conditions of Yakutsk.
Work is executed within implementation of the complex scientific direction 15.1: Multifunction adhesives systems. («The strategic directions of development of materials and technologies of their processing for the period till 2030»)
Keywords: epoxy adhesives, film adhesives, adhesive prepregs, water resistance, frost resistance.
Reference List
1. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030»] // Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33.
2. Kablov E.N. Konstrukcionnye i funkcionalnye materialy – osnova jekonomicheskogo i nauchno-tehnicheskogo razvitija Rossii [Constructional and functional materials – a basis of economic and scientific and technical development of Russia] // Voprosy materialovedenija. 2006. №1. S. 64–67.
3. Petrova A.P., Sharova I.A., Lukina N.F., Buznik V.M. Vozmozhnosti primenenija kleev v arkticheskih uslovijah [Possibilities of application of glues in the Arctic conditions] // Klei. Germetiki. Tehnologii. 2015. № 7. S. 10–15.
4. Petrova A.P., Donskoj A.A. Klejashhie materialy [Gluing materials]. Germetiki: Sprav. SPb.: NPO «Professional», 2008. 559 s.
5. Petrova A.P., Lukina N.F., Dementeva L.A., Avdonina I.A., Tjumeneva T.Ju., Zhadova N.S. Klei dlja aviacionnoj tehniki [Glues for aviation engineering] // RZhH. 2010. T. LIV. №1. S. 46–52.
6. Kablov E.N. Strategicheskie napravleniya razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda [The strategic directions of development of materials and technologies of their processing for the period to 2030] // Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
7. Buznik V.M., Kablov E.N., Koshurina A.A. Materialy dlja slozhnyh tehnicheskih ustrojstv arkticheskogo primenenija [Materials for difficult technical devices of the Arctic application] // Nauchno-tehnicheskie problemy osvoenija Arktiki. M.: Nauka, 2015. 490 s.
8. Grashhenkov D.V., Chursova L.V. Strategiya razvitiya kompozicionnyh i funkcionalnyh materialov [Strategy of development of composite and functional materials] // Aviacionnye materialy i tehnologii. 2012. №S. S. 231–242.
9. Sharova I.A., Lukina N.F. Zazorozapolnjajushhij jepoksidnyj klej holodnogo otverzhdenija [Gap filling epoxy glue of a cold curing] // Klei. Germetiki. Tehnologii. 2012. №3. S. 10–12.
10. Avdonina I.A., Lukina N.F. Bystrootverzhdajushhijsja jepoksidnyj klej VK-93 holodnogo otverzhdenija [Fast-curing epoxy VK-93 glue of a cold curing] // Klei. Germetiki. Tehnologii. 2009. №3. S. 14–17.
11. Zhadova N.S., Tjumeneva T.Ju., Sharova I.A., Lukina N.F. Perspektivnye tehnologii dlja vremennogo operativnogo remonta aviacionnoj tehniki [Perspective technologies for temporary expeditious repair of aviation engineering] // Aviacionnye materialy i tehnologii. 2013. №2. S. 67–70.
12. Sharova I.A., Lukina N.F., Aleksashin V.M., Antjufeeva N.V. Vlijanie sostava na kineticheskie i prochnostnye svojstva bystrootverzhdajushhihsja jepoksidnyh kleevyh kompozicij [Influence of structure on kinetic and strength properties fast-curing epoxy glue compositions] // Klei. Germetiki. Tehnologii. 2015. №2. S. 1–5.
13. Dementeva L.A., Petrova A.P., Lukina N.F. Primenenie i naznachenie jepoksidnogo plenochnogo kleja VK-31 [Application and purpose of epoxy film VK-31 glue] // Vse materialy. Jenciklopedicheskij spravochnik. 2015. №1. S. 25–32.
14. Petrova A.P., Lukina N.F., Dementeva L.A., Anihovskaja L.I. Plenochnye konstrukcionnye klei [Film constructional glues] // Klei. Germetiki. Tehnologii. 2014. №10. S. 7–12.
15. Lukina N.F., Dementeva L.A., Petrova A.P., Serezhenkov A.A. Konstrukcionnye i termostojkie klei [Constructional and heat-resistant glues] // Aviacionnye materialy i tehnologii. 2012. №S. S. 328–335.
16. Sharova I.A., Petrova A.P. Obzor po materialam mezhdunarodnoj konferencii po kleyam i germetikam (WAC-2012, Franciya) [Review of world adhesive and sealant conference (WAC-2012, France] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №8. St. 06. Available at: http://www.viam-works.ru (accessed: March 15, 2016).
17. Sharova I. A. Otechestvennyj i zarubezhnyj opyt v oblasti razrabotki epoksidnyh kleev holodnogo otverzhdeniya [Domestic and foreign experience in area of cold curing epoxy adhesive development] // Trudy VIAM : electron. elektron. nauch.-tehnich. zhurn. 2014. №7. St. 05. Available at: http://viam-works.ru (accessed: March 18, 2016).
18. Kucevich K.E., Dement'eva L.A., Lukina N.F., Chursova L.V. Svojstva i naznachenie kleja VK-36RM dlja aviacionnoj tehniki [Properties and purpose of VK-36PM glue for aviation engineering] // Klei. Germetiki. Tehnologii. 2013. №8. S. 5–6.
19. Petrova A.P., Dementeva L.A., Kucevich K.E., Buznik V.M. O vozmozhnosti ispol'zovanija materialov na osnove kleevyh prepregov v arkticheskih uslovijah [About possibility of use of materials on the basis of glue prepreg in the Arctic conditions] // Klei. Germetiki. Tehnologii. 2015. №2. S. 12–16.
20. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kucevich K.E. Kleevye prepregi – perspektivnye materialy dlja detalej i agregatov iz PKM [Glue prepregs – perspective materials for details and units from PCM] // Kompozity 21 vek. 2014. №2. S. 12–14.
21. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite materials on the basis of glue prepregs] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
22. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kucevich K.E. Kleevye prepregi i sloistye materialy na ih osnove [Adhesive prepregs and layered materials on their basis] // Aviacionnye materialy i tehnologii. 2013. №2. S. 19–21.
23. Shvedkova A.K., Petrova A.P., Buznik V.M. Klimaticheskaja stojkost' kompozicionnyh materialov na osnove kleevyh prepregov v kontinental'nyh arkticheskih uslovijah [Climatic firmness of composite materials on the basis of glue prepregs in continental Arctic conditions] // Klei. Germetiki. Tehnologii. 2016. №1. S. 19–25.
2. Kablov E.N. Konstrukcionnye i funkcionalnye materialy – osnova jekonomicheskogo i nauchno-tehnicheskogo razvitija Rossii [Constructional and functional materials – a basis of economic and scientific and technical development of Russia] // Voprosy materialovedenija. 2006. №1. S. 64–67.
3. Petrova A.P., Sharova I.A., Lukina N.F., Buznik V.M. Vozmozhnosti primenenija kleev v arkticheskih uslovijah [Possibilities of application of glues in the Arctic conditions] // Klei. Germetiki. Tehnologii. 2015. № 7. S. 10–15.
4. Petrova A.P., Donskoj A.A. Klejashhie materialy [Gluing materials]. Germetiki: Sprav. SPb.: NPO «Professional», 2008. 559 s.
5. Petrova A.P., Lukina N.F., Dementeva L.A., Avdonina I.A., Tjumeneva T.Ju., Zhadova N.S. Klei dlja aviacionnoj tehniki [Glues for aviation engineering] // RZhH. 2010. T. LIV. №1. S. 46–52.
6. Kablov E.N. Strategicheskie napravleniya razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda [The strategic directions of development of materials and technologies of their processing for the period to 2030] // Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
7. Buznik V.M., Kablov E.N., Koshurina A.A. Materialy dlja slozhnyh tehnicheskih ustrojstv arkticheskogo primenenija [Materials for difficult technical devices of the Arctic application] // Nauchno-tehnicheskie problemy osvoenija Arktiki. M.: Nauka, 2015. 490 s.
8. Grashhenkov D.V., Chursova L.V. Strategiya razvitiya kompozicionnyh i funkcionalnyh materialov [Strategy of development of composite and functional materials] // Aviacionnye materialy i tehnologii. 2012. №S. S. 231–242.
9. Sharova I.A., Lukina N.F. Zazorozapolnjajushhij jepoksidnyj klej holodnogo otverzhdenija [Gap filling epoxy glue of a cold curing] // Klei. Germetiki. Tehnologii. 2012. №3. S. 10–12.
10. Avdonina I.A., Lukina N.F. Bystrootverzhdajushhijsja jepoksidnyj klej VK-93 holodnogo otverzhdenija [Fast-curing epoxy VK-93 glue of a cold curing] // Klei. Germetiki. Tehnologii. 2009. №3. S. 14–17.
11. Zhadova N.S., Tjumeneva T.Ju., Sharova I.A., Lukina N.F. Perspektivnye tehnologii dlja vremennogo operativnogo remonta aviacionnoj tehniki [Perspective technologies for temporary expeditious repair of aviation engineering] // Aviacionnye materialy i tehnologii. 2013. №2. S. 67–70.
12. Sharova I.A., Lukina N.F., Aleksashin V.M., Antjufeeva N.V. Vlijanie sostava na kineticheskie i prochnostnye svojstva bystrootverzhdajushhihsja jepoksidnyh kleevyh kompozicij [Influence of structure on kinetic and strength properties fast-curing epoxy glue compositions] // Klei. Germetiki. Tehnologii. 2015. №2. S. 1–5.
13. Dementeva L.A., Petrova A.P., Lukina N.F. Primenenie i naznachenie jepoksidnogo plenochnogo kleja VK-31 [Application and purpose of epoxy film VK-31 glue] // Vse materialy. Jenciklopedicheskij spravochnik. 2015. №1. S. 25–32.
14. Petrova A.P., Lukina N.F., Dementeva L.A., Anihovskaja L.I. Plenochnye konstrukcionnye klei [Film constructional glues] // Klei. Germetiki. Tehnologii. 2014. №10. S. 7–12.
15. Lukina N.F., Dementeva L.A., Petrova A.P., Serezhenkov A.A. Konstrukcionnye i termostojkie klei [Constructional and heat-resistant glues] // Aviacionnye materialy i tehnologii. 2012. №S. S. 328–335.
16. Sharova I.A., Petrova A.P. Obzor po materialam mezhdunarodnoj konferencii po kleyam i germetikam (WAC-2012, Franciya) [Review of world adhesive and sealant conference (WAC-2012, France] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №8. St. 06. Available at: http://www.viam-works.ru (accessed: March 15, 2016).
17. Sharova I. A. Otechestvennyj i zarubezhnyj opyt v oblasti razrabotki epoksidnyh kleev holodnogo otverzhdeniya [Domestic and foreign experience in area of cold curing epoxy adhesive development] // Trudy VIAM : electron. elektron. nauch.-tehnich. zhurn. 2014. №7. St. 05. Available at: http://viam-works.ru (accessed: March 18, 2016).
18. Kucevich K.E., Dement'eva L.A., Lukina N.F., Chursova L.V. Svojstva i naznachenie kleja VK-36RM dlja aviacionnoj tehniki [Properties and purpose of VK-36PM glue for aviation engineering] // Klei. Germetiki. Tehnologii. 2013. №8. S. 5–6.
19. Petrova A.P., Dementeva L.A., Kucevich K.E., Buznik V.M. O vozmozhnosti ispol'zovanija materialov na osnove kleevyh prepregov v arkticheskih uslovijah [About possibility of use of materials on the basis of glue prepreg in the Arctic conditions] // Klei. Germetiki. Tehnologii. 2015. №2. S. 12–16.
20. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kucevich K.E. Kleevye prepregi – perspektivnye materialy dlja detalej i agregatov iz PKM [Glue prepregs – perspective materials for details and units from PCM] // Kompozity 21 vek. 2014. №2. S. 12–14.
21. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite materials on the basis of glue prepregs] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
22. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kucevich K.E. Kleevye prepregi i sloistye materialy na ih osnove [Adhesive prepregs and layered materials on their basis] // Aviacionnye materialy i tehnologii. 2013. №2. S. 19–21.
23. Shvedkova A.K., Petrova A.P., Buznik V.M. Klimaticheskaja stojkost' kompozicionnyh materialov na osnove kleevyh prepregov v kontinental'nyh arkticheskih uslovijah [Climatic firmness of composite materials on the basis of glue prepregs in continental Arctic conditions] // Klei. Germetiki. Tehnologii. 2016. №1. S. 19–25.
2.
category: Functional and smart materials
УДК 539.61:539.3
Adhesion and adhesion mechanics
Average adhesive strength is the most common measured result of adhesional experiments. It appears to be the function of different experimental parameters. Inhomogenеous stress distribution in the surface of adhesive joint is the reason of this phenomenon. This is the problem of adhesive mechanics. This paper briefly describes proposed physical approach to solving the problem and compares theoretical and experimental data.
Keywords: adhesion, mechanics, adhesive bonding intensity, stress, strength, contact layer.
Reference List
1. Rabinovich A.L. Vvedenie v mehaniku armirovannyh polimerov [Introduction in mechanics of the reinforced polymers]. M.: Nauka, 1970. 482 s.
2. Frejdin A.S., Turusov R.A. Svojstva i raschet adgezionnyh soedinenij [Properties and calculation of adhesive connections]. M.: Himija, 1990. 255 s.
3. Turusov R.A. Adgezionnaja mehanika [Adhesive mechanics]. M.: MGSU, 2015. 230 s.
4. Berlin A.A. Principy sozdanija kompozicionnyh polimernyh materialov [Principles of creation of composite polymeric materials]. M.: Himija, 1990. 240 s.
5. Polimernye kompozicionnye materialy. Svojstva, struktura, tehnologija [Polymeric composite materials. Properties, structure, technology] / pod red. A.A. Berlina. SPb.: Professija, 2009. 555 s.
2. Frejdin A.S., Turusov R.A. Svojstva i raschet adgezionnyh soedinenij [Properties and calculation of adhesive connections]. M.: Himija, 1990. 255 s.
3. Turusov R.A. Adgezionnaja mehanika [Adhesive mechanics]. M.: MGSU, 2015. 230 s.
4. Berlin A.A. Principy sozdanija kompozicionnyh polimernyh materialov [Principles of creation of composite polymeric materials]. M.: Himija, 1990. 240 s.
5. Polimernye kompozicionnye materialy. Svojstva, struktura, tehnologija [Polymeric composite materials. Properties, structure, technology] / pod red. A.A. Berlina. SPb.: Professija, 2009. 555 s.
3.
category: Composite materials
УДК 621.792.053
Dementyeva L.A.1, Lukina N.Ph.1, Petrova A.P.1
The use of adhesive binders for production of polymeric composite materials.
The article presents the rheological properties of the adhesive binders and their relationship with temperature and time parameters of the production of adhesive prepregs. Displaying appointment of binders and adhesive properties of carbon and glass prepregs based on them, and the properties of composite adhesive materials.
Work is executed within implementation of the complex scientific direction 15.1. «Multifunction gluing systems» («The strategic directions of development of materials and technologies of their processing for the period till 2030»)
Keywords: adhesive bonding, adhesive prepreg, rheological and mechanical properties, glass filler, carbon filler.
Reference List
1. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the develop-ment of materials and technologies of their processing for the period until 2030»] //Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33.
2. Kablov E.N. Strategicheskie napravleniya razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda [The strategic directions of development of materials and technologies of their pro-cessing for the period to 2030] // Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
3. Petrovа A.P., Dementyevа L.A., Lukina N.F., Chursova L.V. [Adhesive binders for polymer composite materials based on carbon- and glass fillers] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №9. St. 11. Available at: http://www.viam-works.ru (accessed: April 5, 2016). DOI: 10.18577/2307-6046-2015-0-9-11-11.
4. Kirienko T.A., Lukina N.F., Kucevich K.E., Petrova A.P. Issledovanie reologicheskih svojstv kleevyh svjazujushhih [Research of reologichesky properties of the glue binding] // Klei. Germetiki. Tehnologii. 2016. №2. S. 6–8.
5. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite mate-rials on the basis of glue prepregs] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
6. Anihovskaja L.I., Minakov V.T. Klei i kleevye prepregi dlja perspektivnyh izdelij aviakosmicheskoj tehniki [Glues and glue prepres for perspective products of aerospace equipment] // Aviacionnye materialy. Izbrannye trudy «VIAM» 1932–2002: jubilejnyj nauch.-tehnich. sb. M.: MISIS–VIAM, 2002. S. 315–326.
7. Kucevich K.E., Aleksashin V.M., Petrova A.P., Antjufeeva N.V. Issledovanie kinetiki reakcij otverzhdenija kleevyh svjazujushhih [Research of kinetics of reactions of an cure of the glue binding] // Klei. Germetiki. Tehnoligii. 2014. №11. S. 27–31.
8. Dementeva L.A., Lukina N.F., Petrova A.P., Kucevich K.E. Primenenie kompozicionnyh materialov na osnove kleevyh prepregov v mashinostroenii [Application of composite materials on the basis of glue препрегов in mechanical engineering] // Vse materialy. Jenciklopedicheskij spravochnik. 2014. №8. S. 11–17.
9. Sharova I.A., Petrova A.P. Obzor po materialam mezhdunarodnoj konferencii po kleyam i germet-ikam (WAC-2012, Franciya) [Review of world adhesive and sealant conference (WAC-2012, France] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №8. St. 06. Available at: http://www.viam-works.ru (accessed: April 5, 2016).
10. Grashhenkov D.V., Chursova L.V. Strategiya razvitiya kompozicionnyh i funkcionalnyh materialov [Strategy of development of composite and functional materials] // Aviacionnye materialy i tehnologii. 2012. №S. S. 231–242.
11. Lukina N.F., Dementeva L.A., Petrova A.P., Serezhenkov A.A. Konstrukcionnye i termostojkie klei [Constructional and heat-resistant glues] // Aviacionnye materialy i tehnologii. 2012. №S. S. 328–335.
12. Kablov E.N., Minakov V.T., Anihovskaja L.I. Klei i materialy na ih osnove dlja remonta konstrukcij aviacionnoj tehniki [Glues and materials on their basis for repair of designs of aviation engineering] // Aviacionnye materialy i tehnologii: nauch.-tehnich. sb. M.: VIAM, 2002. №1. S. 61–65.
13. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kucevich K.E. Kleevye prepregi i sloistye materialy na ih osnove [Adhesive prepregs and layered materials on their basis] // Aviacionnye materialy i tehnologii. 2013. №2. S. 19–21.
14. Petrova A.P. Osnovnye jetapy tehnologii skleivanija [Main stages of technology of pasting] // Klei. Germetiki. Tehnologii. 2014. №2. S. 24–30.
15. Kucevich K.E., Dement'eva L.A., Lukina N.F., Chursova L.V. Svojstva i naznachenie kleja VK-36RM dlja aviacionnoj tehniki [Properties and purpose of VK-36PM glue for aviation engi-neering] // Klei. Germetiki. Tehnologii. 2013. №8. S. 5–6.
2. Kablov E.N. Strategicheskie napravleniya razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda [The strategic directions of development of materials and technologies of their pro-cessing for the period to 2030] // Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
3. Petrovа A.P., Dementyevа L.A., Lukina N.F., Chursova L.V. [Adhesive binders for polymer composite materials based on carbon- and glass fillers] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №9. St. 11. Available at: http://www.viam-works.ru (accessed: April 5, 2016). DOI: 10.18577/2307-6046-2015-0-9-11-11.
4. Kirienko T.A., Lukina N.F., Kucevich K.E., Petrova A.P. Issledovanie reologicheskih svojstv kleevyh svjazujushhih [Research of reologichesky properties of the glue binding] // Klei. Germetiki. Tehnologii. 2016. №2. S. 6–8.
5. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite mate-rials on the basis of glue prepregs] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
6. Anihovskaja L.I., Minakov V.T. Klei i kleevye prepregi dlja perspektivnyh izdelij aviakosmicheskoj tehniki [Glues and glue prepres for perspective products of aerospace equipment] // Aviacionnye materialy. Izbrannye trudy «VIAM» 1932–2002: jubilejnyj nauch.-tehnich. sb. M.: MISIS–VIAM, 2002. S. 315–326.
7. Kucevich K.E., Aleksashin V.M., Petrova A.P., Antjufeeva N.V. Issledovanie kinetiki reakcij otverzhdenija kleevyh svjazujushhih [Research of kinetics of reactions of an cure of the glue binding] // Klei. Germetiki. Tehnoligii. 2014. №11. S. 27–31.
8. Dementeva L.A., Lukina N.F., Petrova A.P., Kucevich K.E. Primenenie kompozicionnyh materialov na osnove kleevyh prepregov v mashinostroenii [Application of composite materials on the basis of glue препрегов in mechanical engineering] // Vse materialy. Jenciklopedicheskij spravochnik. 2014. №8. S. 11–17.
9. Sharova I.A., Petrova A.P. Obzor po materialam mezhdunarodnoj konferencii po kleyam i germet-ikam (WAC-2012, Franciya) [Review of world adhesive and sealant conference (WAC-2012, France] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №8. St. 06. Available at: http://www.viam-works.ru (accessed: April 5, 2016).
10. Grashhenkov D.V., Chursova L.V. Strategiya razvitiya kompozicionnyh i funkcionalnyh materialov [Strategy of development of composite and functional materials] // Aviacionnye materialy i tehnologii. 2012. №S. S. 231–242.
11. Lukina N.F., Dementeva L.A., Petrova A.P., Serezhenkov A.A. Konstrukcionnye i termostojkie klei [Constructional and heat-resistant glues] // Aviacionnye materialy i tehnologii. 2012. №S. S. 328–335.
12. Kablov E.N., Minakov V.T., Anihovskaja L.I. Klei i materialy na ih osnove dlja remonta konstrukcij aviacionnoj tehniki [Glues and materials on their basis for repair of designs of aviation engineering] // Aviacionnye materialy i tehnologii: nauch.-tehnich. sb. M.: VIAM, 2002. №1. S. 61–65.
13. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kucevich K.E. Kleevye prepregi i sloistye materialy na ih osnove [Adhesive prepregs and layered materials on their basis] // Aviacionnye materialy i tehnologii. 2013. №2. S. 19–21.
14. Petrova A.P. Osnovnye jetapy tehnologii skleivanija [Main stages of technology of pasting] // Klei. Germetiki. Tehnologii. 2014. №2. S. 24–30.
15. Kucevich K.E., Dement'eva L.A., Lukina N.F., Chursova L.V. Svojstva i naznachenie kleja VK-36RM dlja aviacionnoj tehniki [Properties and purpose of VK-36PM glue for aviation engi-neering] // Klei. Germetiki. Tehnologii. 2013. №8. S. 5–6.
4.
category: Functional and smart materials
УДК 621.792.053
Adhesive Materials in the Production of Foil Clad Dielectrics and Printed Circuits
A review of adhesive materials for production of dielectric substrates of rigid and flexible printed circuits is presented. Testing results for physico-mechanical proper-ties of adhesive compounds and composite materials on their basis are presented.
Keywords: adhesive materials, printed circuits
5.
category: History of materials
УДК 621.792.053
I.A. Sharova1, Lukina N.Ph.1
Properties and assignment of aviation glues
The basic properties of high-strength film adhesives for constructional purposes, rubber adhesives, epoxy cold-curing adhesives, heat-resistant adhesives, adhesives for functional purpose are presents. Particular attention to new developments are given. The application of adhesives and the prospects for the use of new adhesives are shows. The problematic issues associated with the quality or lack of raw materials for the creation of adhesives with new properties are marked.
Work is executed within implementation of the complex scientific direction 15.1. «Multifunction gluing systems» («The strategic directions of development of materials and technologies of their processing for the period till 2030»)
Keywords: adhesives, physical and mechanical properties, areas of use, curing temperature, the fast adhesive, heat resistance.
Reference List
1. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the develop-ment of materials and technologies of their processing for the period until 2030»] //Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33.
2. Istorija aviacionnogo materialovedenija. VIAM – 80 let: gody i ljudi [History of aviation materials science. VIAM – 80 years: years and people] / pod obshh. red. E.N. Kablova. M.: VIAM, 2012. S. 330–342.
3. Demonis I.M., Petrova A.P., Lukina N.F., Eliseev O.A. VIAM – nauchnyj centr aviacionnogo materialovedenija [VIAM – scientific center of aviation materials science] / Klei. Germetiki. Tehnologii. 2012. №5. S. 3–7.
4. Petrova A.P., Lukina N.F., Dementeva L.A., Avdonina I.A., Tjumeneva T.Ju., Zhadova N.S. Klei dlja aviacionnoj tehniki [Glues for aviation engineering] // RZhH. 2010. TLIV. №1. S. 46–52.
5. Kablov E.N. Materialy i himicheskie tehnologii dlja aviacionnoj tehniki [Materials and chemical technologies for aviation engineering] // Vestnik Rossijskoj akademii nauk. 2012. T. 82. №6. S. 520–530.
6. Lukina N.F., Dementeva L.A., Petrova A.P., Serezhenkov A.A. Konstrukcionnye i termostojkie klei [Constructional and heat-resistant glues] // Aviacionnye materialy i tehnologii. 2012. №S. S. 328–335.
7. Kablov E.N., Minakov V.T., Anihovskaja L.I. Klei i materialy na ih osnove dlja remonta kon-strukcij aviacionnoj tehniki [Glues and materials on their basis for repair of designs of aviation en-gineering] // Aviacionnye materialy i tehnologii: nauch.-tehnich. sb. M.: VIAM, 2002. №1. S. 61–65.
8. Petrova A.P., Dementeva L.A., Lukina N.F., Anihovskaja L.I. Plenochnye konstrukcionnye klei [Film constructional glues] // Klei. Germetiki. Tehnologii. 2014. №10. S. 7–12.
9. Petrova A.P., Lukina N.F., Sharova I.A. Ocenka prochnosti kleevyh soedinenij, vypolnennyh jepoksidnymi klejami, pri vozdejstvii razlichnyh faktorov [Assessment of durability of the glue connections executed by epoxy glues, at influence of various factors] // Vse materialy. Jenciklopedicheskij spravochnik. 2013. №8. S. 28–34.
10. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite materials on the basis of glue препрегов] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
11. Sharova I. A. Otechestvennyj i zarubezhnyj opyt v oblasti razrabotki epoksidnyh kleev holodnogo otverzhdeniya [Domestic and foreign experience in area of cold curing epoxy adhesive develop-ment] // Trudy VIAM : electron. elektron. nauch.-tehnich. zhurn. 2014. №7. St. 05. Available at: http://viam-works.ru (accessed: April 20, 2016). DOI: 10.18577/2307-6046-2014-0-7-5-5.
12. Sharova I.A., Petrova A.P. Obzor po materialam mezhdunarodnoj konferencii po kleyam i germet-ikam (WAC-2012, Franciya) [Review of world adhesive and sealant conference (WAC-2012, France] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №8. St. 06. Available at: http://www.viam-works.ru (accessed: April 20, 2016).
13. Lukina N.F., Sharova I.A., Shuklina O.V., Chursova L.V. Novye razrabotki v oblasti kleev aviacionnogo naznachenija [New development in the field of glues of aviation appointment] // Vse materialy. Jenciklopedicheskij spravochnik. 2013. №2. S. 9–13.
14. Sharova I.A., Zhadova N.S., Lukina N.F. Klejashhie materialy i tehnologii dlja vremennogo operativnogo remonta sotovyh agregatov iz polimernyh kompozicionnyh materialov [Gluing materials and technologies for temporary expeditious repair of cellular units from polymeric composite materials] // Klei. Germetiki. Tehnologii. 2012. №5. S. 36–39.
15. Shuklina O.V., Lukina N.F. Svojstva novogo teplostojkogo kleja VS-10T-U [Properties of new heatresistant glue VS-10T-U] // Klei. Germetiki. Tehnologii. 2012. № 5. S. 8–9.
2. Istorija aviacionnogo materialovedenija. VIAM – 80 let: gody i ljudi [History of aviation materials science. VIAM – 80 years: years and people] / pod obshh. red. E.N. Kablova. M.: VIAM, 2012. S. 330–342.
3. Demonis I.M., Petrova A.P., Lukina N.F., Eliseev O.A. VIAM – nauchnyj centr aviacionnogo materialovedenija [VIAM – scientific center of aviation materials science] / Klei. Germetiki. Tehnologii. 2012. №5. S. 3–7.
4. Petrova A.P., Lukina N.F., Dementeva L.A., Avdonina I.A., Tjumeneva T.Ju., Zhadova N.S. Klei dlja aviacionnoj tehniki [Glues for aviation engineering] // RZhH. 2010. TLIV. №1. S. 46–52.
5. Kablov E.N. Materialy i himicheskie tehnologii dlja aviacionnoj tehniki [Materials and chemical technologies for aviation engineering] // Vestnik Rossijskoj akademii nauk. 2012. T. 82. №6. S. 520–530.
6. Lukina N.F., Dementeva L.A., Petrova A.P., Serezhenkov A.A. Konstrukcionnye i termostojkie klei [Constructional and heat-resistant glues] // Aviacionnye materialy i tehnologii. 2012. №S. S. 328–335.
7. Kablov E.N., Minakov V.T., Anihovskaja L.I. Klei i materialy na ih osnove dlja remonta kon-strukcij aviacionnoj tehniki [Glues and materials on their basis for repair of designs of aviation en-gineering] // Aviacionnye materialy i tehnologii: nauch.-tehnich. sb. M.: VIAM, 2002. №1. S. 61–65.
8. Petrova A.P., Dementeva L.A., Lukina N.F., Anihovskaja L.I. Plenochnye konstrukcionnye klei [Film constructional glues] // Klei. Germetiki. Tehnologii. 2014. №10. S. 7–12.
9. Petrova A.P., Lukina N.F., Sharova I.A. Ocenka prochnosti kleevyh soedinenij, vypolnennyh jepoksidnymi klejami, pri vozdejstvii razlichnyh faktorov [Assessment of durability of the glue connections executed by epoxy glues, at influence of various factors] // Vse materialy. Jenciklopedicheskij spravochnik. 2013. №8. S. 28–34.
10. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite materials on the basis of glue препрегов] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
11. Sharova I. A. Otechestvennyj i zarubezhnyj opyt v oblasti razrabotki epoksidnyh kleev holodnogo otverzhdeniya [Domestic and foreign experience in area of cold curing epoxy adhesive develop-ment] // Trudy VIAM : electron. elektron. nauch.-tehnich. zhurn. 2014. №7. St. 05. Available at: http://viam-works.ru (accessed: April 20, 2016). DOI: 10.18577/2307-6046-2014-0-7-5-5.
12. Sharova I.A., Petrova A.P. Obzor po materialam mezhdunarodnoj konferencii po kleyam i germet-ikam (WAC-2012, Franciya) [Review of world adhesive and sealant conference (WAC-2012, France] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2013. №8. St. 06. Available at: http://www.viam-works.ru (accessed: April 20, 2016).
13. Lukina N.F., Sharova I.A., Shuklina O.V., Chursova L.V. Novye razrabotki v oblasti kleev aviacionnogo naznachenija [New development in the field of glues of aviation appointment] // Vse materialy. Jenciklopedicheskij spravochnik. 2013. №2. S. 9–13.
14. Sharova I.A., Zhadova N.S., Lukina N.F. Klejashhie materialy i tehnologii dlja vremennogo operativnogo remonta sotovyh agregatov iz polimernyh kompozicionnyh materialov [Gluing materials and technologies for temporary expeditious repair of cellular units from polymeric composite materials] // Klei. Germetiki. Tehnologii. 2012. №5. S. 36–39.
15. Shuklina O.V., Lukina N.F. Svojstva novogo teplostojkogo kleja VS-10T-U [Properties of new heatresistant glue VS-10T-U] // Klei. Germetiki. Tehnologii. 2012. № 5. S. 8–9.
6.
category: Functional and smart materials
УДК 678.686:678.643
New adhesives of development of OJSC «Composite» for articles of rocket and space engineering
The paper presents new adhesives for space-rocket techniques: assembly polyurethane adhesives for adhering of bases used for mounting cables and interblock pipelines on spacecraft frame, structural adhesives with high heat resistance (150÷200°С), high-temperature cold-setting adhesives
Keywords: polyurethane assembly adhesive, structural, high-temperature adhesives, outgassing, shear strength.
7.
category: Functional and smart materials
УДК 66.014:541.64
Mukhametov R.R.1
Heat-resistant film adhesive of constructive purposes
The composition and method of synthesis of an adhesive based on the bisphenol A cyanate ester, polysulfone and epoxy novolac resin were developed. The reaction of a cyanate ester with an epoxy resins was investigated by the method of IR spectroscopy. It was shown that copolymerization of an aryl dicyanate and epoxy oligomer leads to receiving the oxazolidinone structures which promoting increase of the moisture resistance. Received epoxy cyanate film adhesive can be used in conditions of high humidity and a temperature to 200°C.
This work was executed within implementation of the complex scientific direction 13.1. «Binding for polymeric and composite materials of structural and special purpose» («The strategic directions of development of materials and technologies of their processing for the period till 2030»)
Keywords: cyanate ester, epoxy resin, cyclotrimerisation, polycyanurate, curing, film adhesive, IR spectroscopy, shear strength.
Reference List
1. Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the develop-ment of materials and technologies of their processing for the period until 2030»] // Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33.
2. Kablov E.N. Himija v aviacionnom materialovedenii [Chemistry in aviation materials science] // Rossijskij himicheskij zhurnal. 2010. T. LIV. №1. S. 3–4.
3. Kablov E.N. Kompozity: segodnja i zavtra [Composites: today and tomorrow] // Metally Evrazii. 2015. №1. S. 36–39.
4. Pizzi A., Mittal K.L. Revised and expanded: handbook of adhesive technology. Marcel Dekker Inc., 2003. 999 p.
5. Petrova A.P., Lukina N.F., Starodubceva O.A., Dementeva L.A. 50 let laboratorii «Klei i kleevye prepregi» [50 years of laboratory «Glues and glue prepregs»]. M.: VIAM, 2008. 26 s.
6. Istorija aviacionnogo materialovedenija. VIAM – 80 let: gody i ljudi [History of aviation materials science. VIAM – 80 years: years and people] / pod obshh. red. E.N. Kablova. M.: VIAM, 2012. 520 s.
7. Petrovа A.P., Dementyevа L.A., Lukina N.F., Chursova L.V. [Adhesive binders for polymer composite materials based on carbon- and glass fillers] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №9. St. 11. Available at: http://www.viam-works.ru (accessed: March 15, 2016). DOI: 10.18577/2307-6046-2015-0-9-11-11.
8. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite materials on the basis of glue препрегов] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
9. Lukina N.F., Dementeva L.A., Kucevich K.E. Kleevye prepregi na osnove tkanej Porcher – perspektivnye materialy dlja detalej i agregatov iz PKM [Glue prepregs on the basis of Porcher fabrics – perspective materials for details and units from PCM] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2014. №6. St. 10. Available at: http://www.viam-works.ru (accessed: April 01, 2016). DOI: 10.18577/2307-6046-2014-0-6-10-10.
10. Pocius A. Klei, adgezija, tehnologija skleivanija: per. s angl [Glues, adhesion, technology of pasting: translation from English]. SPb.: Professija, 2016. 384 s.
11. Lavrishhev D.S., Mihajlin Ju.A. Poliimidnye klei [Poliimidnye glues] // Klei. Germetiki. Tehnologii. 2006. №8. S. 13–18.
12. Kuznecov A.A., Semenova G.K. Perspektivnye vysokotemperaturnye termoreaktivnye svjazujushhie dlja polimernyh kompozicionnyh materialov [Perspective high-temperature thermojet binding for polymeric composite materials] // Rossijskij himicheskij zhurnal. 2009. T. LIII. №4. S. 86–96.
13. Muhametov R.R., Merkulova Ju.I., Dolgova E.V., Dushin M.I. Poluchenie termostojkih polimernyh matric po reakcii policiklotrimerizacii cianovyh jefirov [Receiving heat-resistant polymeric matrixes on reaction of a politsiklotrimerizatsiya of cyanic air] // Klei. Germetiki. Tehnologii. 2014. №5. S. 10–14.
14. Muhametov R.R., Ahmadieva K.R., Chursova L.V., Kogan D.I. Novye polimernye svyazujushhie dlya perspektivnyh metodov izgotovleniya konstrukcionnyh voloknistyh PKM [New polymeric binding for perspective methods of manufacturing of constructional fibrous PCM] //Aviacionnye materialy i tehnologii. 2011. №2. S. 38–42.
15. Zaldivar R. Lessons Learned in the Processing of Polycyanurate Resins Composites // Aerospace Report No. TR-98 (8565)-8 (2002).
16. Huang Li, Wang C., Lu Y. Thermal and Moisture Adsorption Properties of Cyanate Ester Modified Epoxy Resin and Fiber-Glass. Composites // Journal of Reinforced Plastics and Composites. 2008. V. 27. №7. P. 725–738.
2. Kablov E.N. Himija v aviacionnom materialovedenii [Chemistry in aviation materials science] // Rossijskij himicheskij zhurnal. 2010. T. LIV. №1. S. 3–4.
3. Kablov E.N. Kompozity: segodnja i zavtra [Composites: today and tomorrow] // Metally Evrazii. 2015. №1. S. 36–39.
4. Pizzi A., Mittal K.L. Revised and expanded: handbook of adhesive technology. Marcel Dekker Inc., 2003. 999 p.
5. Petrova A.P., Lukina N.F., Starodubceva O.A., Dementeva L.A. 50 let laboratorii «Klei i kleevye prepregi» [50 years of laboratory «Glues and glue prepregs»]. M.: VIAM, 2008. 26 s.
6. Istorija aviacionnogo materialovedenija. VIAM – 80 let: gody i ljudi [History of aviation materials science. VIAM – 80 years: years and people] / pod obshh. red. E.N. Kablova. M.: VIAM, 2012. 520 s.
7. Petrovа A.P., Dementyevа L.A., Lukina N.F., Chursova L.V. [Adhesive binders for polymer composite materials based on carbon- and glass fillers] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №9. St. 11. Available at: http://www.viam-works.ru (accessed: March 15, 2016). DOI: 10.18577/2307-6046-2015-0-9-11-11.
8. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kucevich K.E., Petrova A.P. Svojstva kompozicionnyh materialov na osnove kleevyh prepregov [Properties of composite materials on the basis of glue препрегов] // Klei. Germetiki. Tehnologii. 2012. №6. S. 19–24.
9. Lukina N.F., Dementeva L.A., Kucevich K.E. Kleevye prepregi na osnove tkanej Porcher – perspektivnye materialy dlja detalej i agregatov iz PKM [Glue prepregs on the basis of Porcher fabrics – perspective materials for details and units from PCM] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2014. №6. St. 10. Available at: http://www.viam-works.ru (accessed: April 01, 2016). DOI: 10.18577/2307-6046-2014-0-6-10-10.
10. Pocius A. Klei, adgezija, tehnologija skleivanija: per. s angl [Glues, adhesion, technology of pasting: translation from English]. SPb.: Professija, 2016. 384 s.
11. Lavrishhev D.S., Mihajlin Ju.A. Poliimidnye klei [Poliimidnye glues] // Klei. Germetiki. Tehnologii. 2006. №8. S. 13–18.
12. Kuznecov A.A., Semenova G.K. Perspektivnye vysokotemperaturnye termoreaktivnye svjazujushhie dlja polimernyh kompozicionnyh materialov [Perspective high-temperature thermojet binding for polymeric composite materials] // Rossijskij himicheskij zhurnal. 2009. T. LIII. №4. S. 86–96.
13. Muhametov R.R., Merkulova Ju.I., Dolgova E.V., Dushin M.I. Poluchenie termostojkih polimernyh matric po reakcii policiklotrimerizacii cianovyh jefirov [Receiving heat-resistant polymeric matrixes on reaction of a politsiklotrimerizatsiya of cyanic air] // Klei. Germetiki. Tehnologii. 2014. №5. S. 10–14.
14. Muhametov R.R., Ahmadieva K.R., Chursova L.V., Kogan D.I. Novye polimernye svyazujushhie dlya perspektivnyh metodov izgotovleniya konstrukcionnyh voloknistyh PKM [New polymeric binding for perspective methods of manufacturing of constructional fibrous PCM] //Aviacionnye materialy i tehnologii. 2011. №2. S. 38–42.
15. Zaldivar R. Lessons Learned in the Processing of Polycyanurate Resins Composites // Aerospace Report No. TR-98 (8565)-8 (2002).
16. Huang Li, Wang C., Lu Y. Thermal and Moisture Adsorption Properties of Cyanate Ester Modified Epoxy Resin and Fiber-Glass. Composites // Journal of Reinforced Plastics and Composites. 2008. V. 27. №7. P. 725–738.
8.
category: Functional and smart materials
УДК 665.939.744.32:678.043
Modern developments of the V.A. Kargin Polymer Research Institute in the field of acrylic adhesives
The article describes adhesives based on acrylic monomers and oligomers designed by V.A. Kargin Polymer Research Institute for use as anaerobic sealants and gaskets, UV-curable coatings and adhesives for constructional purposes, as well as other adhesive and sealant compositions and their application techniques.
Keywords: anaerobic adhesives and sealants, structural acrylic adhesives.
Reference List
1. Aronovich D.A., Hamidulova Z.S., Muroh A.F. i dr. Kleevye i germetizirujushhie materialy, razrabotannye v FGUP «NII polimerov» [The glue and pressurizing materials developed in «SRI polimerov» Federal State Unitary Enterprise] // Novye klei i tehnologija skleivanija: mater. nauch.-praktich. seminara / CRDZ. M., 2014. S. 31–43.
2. Sineokov A.P., Hamidulova Z.S., Aronovich D.A. Novye razrabotki v oblasti reakcionnosposobnyh akrilovyh kleevyh i germetizirujushhih materialov [New development in the field of reaktsionnosposobny acrylic glue and pressurizing materials] // Klei. Germetiki. Tehnologii. 2007. №8. S. 17–21.
3. Muroh A.F., Aronovich D.A., Badryzlova M.P. i dr. Razrabotka anajerobnyh prokladok dlja avtomobilestroenija [Development of anaerobny laying for automotive industry] // Klei. Germetiki. Tehnologii. 2009. №9. S. 10–15.
4. Muroh A.F., Badryzlova M.P., Klenovich O.N. i dr. Sovremennye propityvajushhie materialy i tehnologii [Modern impregnating materials and technologies] // Litejshhik Rossii. 2011. №11. S. 45–46.
5. Aronovich D.A., Sineokova O.A., Zaitova N.V. i dr. UF-otverzhdaemye anajerobnye kleevye kompozicii [UV-curable anaerobny glue compositions] // Klei. Germetiki. Tehnologii. 2014. №5. S. 5–9.
6. Hamidulova Z., Aronovich D., Ustjuzhanceva N. i dr. Fotootverzhdaemye kompozicii dlja specialnyh otraslej tehniki [Photocurable of composition for special branches of equipment] // Promyshlennye pokrytija. 2014. №11–12. S. 52–55.
7. Aronovich D.A., Muroh A.F., Rybachuk G.V. i dr. Razrabotka fotootverzhdaemyh kompozicij so specialnymi svojstvami [Development of photocurable compositions with special properties] // Klei. Germetiki. Tehnologii. 2015. №6. S. 13–18.
8. Ustjuzhanceva N.A., Aronovich D.A., Sineokova O.A. i dr. Razrabotka strukturnyh bystrootverzhdajushhihsja kleev na osnove (met)akrilovyh monomerov [Development structural быстроотверждающихся glues on a basis (met)acrylic monomers] // Klei, germetiki, drugie materialy i tehnologija: mater. nauch.-praktich. seminara / CRDZ. M., 2015. S. 6–12.
9. Sineokova O.A., Hamidulova Z.S., Zhdanova O.G., Sineokov A.P. Termootverzhdaemyj strukturnyj akrilovyj adgeziv [Termohardening structural acrylic adhesive] // Klei. Germetiki. Tehnologii. 2014. №9. S. 5–8.
10. Muroh A.F., Hamidulova Z.S., Aronovich D.A. i dr. Primenenie polimernyh kleev i germetikov v litejnom proizvodstve [Application of polymeric glues and hermetics in foundry production] // Mater. X sezda litejshhikov Rossii. Kazan, 2011. S. 429–432.
11. Muroh A.F., Aronovich D.A., Hamidulova Z.S. i dr. Uplotnenie rezbovyh soedinenij germetikom predvaritel'nogo nanesenija [Consolidation of carving connections by hermetic of preliminary drawing] // Klei. Germetiki. Tehnologi. 2011. №5. S. 8–11.
12. Muroh A.F., Smirnov V.S., Hamidulova Z.S. i dr. Polimernye germetizirujushhie materialy i jeffektivnye tehnologii remonta truboprovodov [Polymeric pressurizing materials and effective technologies of repair of pipelines] // Remont, vosstanovlenie, modernizacija. 2013. №8. S. 32–36.
13. Muroh A.F., Smirnov V.S., Lukonin V.P. i dr. Tehnologija sborki trubchatyh teploobmennikov s ispolzovaniem germetikov [Technology of assembly of tubular heat exchangers with use of hermetics] // Klei. Germetiki. Tehnologii. 2015. №10. S. 38–40.
2. Sineokov A.P., Hamidulova Z.S., Aronovich D.A. Novye razrabotki v oblasti reakcionnosposobnyh akrilovyh kleevyh i germetizirujushhih materialov [New development in the field of reaktsionnosposobny acrylic glue and pressurizing materials] // Klei. Germetiki. Tehnologii. 2007. №8. S. 17–21.
3. Muroh A.F., Aronovich D.A., Badryzlova M.P. i dr. Razrabotka anajerobnyh prokladok dlja avtomobilestroenija [Development of anaerobny laying for automotive industry] // Klei. Germetiki. Tehnologii. 2009. №9. S. 10–15.
4. Muroh A.F., Badryzlova M.P., Klenovich O.N. i dr. Sovremennye propityvajushhie materialy i tehnologii [Modern impregnating materials and technologies] // Litejshhik Rossii. 2011. №11. S. 45–46.
5. Aronovich D.A., Sineokova O.A., Zaitova N.V. i dr. UF-otverzhdaemye anajerobnye kleevye kompozicii [UV-curable anaerobny glue compositions] // Klei. Germetiki. Tehnologii. 2014. №5. S. 5–9.
6. Hamidulova Z., Aronovich D., Ustjuzhanceva N. i dr. Fotootverzhdaemye kompozicii dlja specialnyh otraslej tehniki [Photocurable of composition for special branches of equipment] // Promyshlennye pokrytija. 2014. №11–12. S. 52–55.
7. Aronovich D.A., Muroh A.F., Rybachuk G.V. i dr. Razrabotka fotootverzhdaemyh kompozicij so specialnymi svojstvami [Development of photocurable compositions with special properties] // Klei. Germetiki. Tehnologii. 2015. №6. S. 13–18.
8. Ustjuzhanceva N.A., Aronovich D.A., Sineokova O.A. i dr. Razrabotka strukturnyh bystrootverzhdajushhihsja kleev na osnove (met)akrilovyh monomerov [Development structural быстроотверждающихся glues on a basis (met)acrylic monomers] // Klei, germetiki, drugie materialy i tehnologija: mater. nauch.-praktich. seminara / CRDZ. M., 2015. S. 6–12.
9. Sineokova O.A., Hamidulova Z.S., Zhdanova O.G., Sineokov A.P. Termootverzhdaemyj strukturnyj akrilovyj adgeziv [Termohardening structural acrylic adhesive] // Klei. Germetiki. Tehnologii. 2014. №9. S. 5–8.
10. Muroh A.F., Hamidulova Z.S., Aronovich D.A. i dr. Primenenie polimernyh kleev i germetikov v litejnom proizvodstve [Application of polymeric glues and hermetics in foundry production] // Mater. X sezda litejshhikov Rossii. Kazan, 2011. S. 429–432.
11. Muroh A.F., Aronovich D.A., Hamidulova Z.S. i dr. Uplotnenie rezbovyh soedinenij germetikom predvaritel'nogo nanesenija [Consolidation of carving connections by hermetic of preliminary drawing] // Klei. Germetiki. Tehnologi. 2011. №5. S. 8–11.
12. Muroh A.F., Smirnov V.S., Hamidulova Z.S. i dr. Polimernye germetizirujushhie materialy i jeffektivnye tehnologii remonta truboprovodov [Polymeric pressurizing materials and effective technologies of repair of pipelines] // Remont, vosstanovlenie, modernizacija. 2013. №8. S. 32–36.
13. Muroh A.F., Smirnov V.S., Lukonin V.P. i dr. Tehnologija sborki trubchatyh teploobmennikov s ispolzovaniem germetikov [Technology of assembly of tubular heat exchangers with use of hermetics] // Klei. Germetiki. Tehnologii. 2015. №10. S. 38–40.
9.
category: Functional and smart materials
УДК 621.792.053:346.544.42
Systems of Standardization for Self-Adhesive Materials
LiKK, LLC produces wide range of self-adhesive materials. In communication with customers we often faced with difference in terms and methods of evaluation of the quality of self-adhesive materials. The aim of this article to inform specialists working with self-adhesive materials about the most common systems of standards used in world practice for quality control.
Keywords: standard, Organization for Standardization, self-adhesive materials, label.
Reference List
1. Lipeckaja kleevaja kompanija (LiKK) [Lipetsk glue company]. Available at: http://likk.ru/testirovanie_materialov/kontrol_kachestva/ (accessed: March 14, 2016).
2. Krylova G.D. Osnovy standartizacii, sertifikacii, metrologii [Bases of standardization, certification, metrology]. M.: JuNITI, 1998. 479 s.
3. Lific I.M. Standartizacija, metrologija i sertifikacija [Standardization, metrology and certification]. M.: Jurajt, 2000. 285 s.
4. International Organization for Standardization. Available at: http://www.iso.org/iso/about.htm (accessed: February 18, 2016).
5. American Society for Testing and Materials. Available at: http://www.astm.org/ABOUT/aboutASTM.html (accessed: February 19, 2016).
6. The Pressure Sensitive Tapes Council. Available at: http://www.pstc.org/about.htm (accessed: March 02, 2016).
7. Tag and Label Manufacturers Institute. Available at: http://www.tlmi.com/history.php (accessed: March 04, 2016).
8. European Association for the Self Adhesive Tape Industry (Afera). Available at: http://www.afera.com/templates/mercury.asp?page_id=1573 (accessed: March 04, 2016).
9. Féderation Internationale des fabricants et transformateurs d' Adhésifs et Thermocollants. Available at: http://www.finat.com/templates/mercury.asp?page_id=1492 (accessed: March 02, 2016).
10. European Committee for Standardization. Available at: http://www.cen.eu/cenorm/aboutus/index.asp (accessed: February 25, 2016).
11. ChemInstruments. Available at: http://www.chemsultants.com/testing-equipment-products/index.aspx (accessed: March 15, 2016).
2. Krylova G.D. Osnovy standartizacii, sertifikacii, metrologii [Bases of standardization, certification, metrology]. M.: JuNITI, 1998. 479 s.
3. Lific I.M. Standartizacija, metrologija i sertifikacija [Standardization, metrology and certification]. M.: Jurajt, 2000. 285 s.
4. International Organization for Standardization. Available at: http://www.iso.org/iso/about.htm (accessed: February 18, 2016).
5. American Society for Testing and Materials. Available at: http://www.astm.org/ABOUT/aboutASTM.html (accessed: February 19, 2016).
6. The Pressure Sensitive Tapes Council. Available at: http://www.pstc.org/about.htm (accessed: March 02, 2016).
7. Tag and Label Manufacturers Institute. Available at: http://www.tlmi.com/history.php (accessed: March 04, 2016).
8. European Association for the Self Adhesive Tape Industry (Afera). Available at: http://www.afera.com/templates/mercury.asp?page_id=1573 (accessed: March 04, 2016).
9. Féderation Internationale des fabricants et transformateurs d' Adhésifs et Thermocollants. Available at: http://www.finat.com/templates/mercury.asp?page_id=1492 (accessed: March 02, 2016).
10. European Committee for Standardization. Available at: http://www.cen.eu/cenorm/aboutus/index.asp (accessed: February 25, 2016).
11. ChemInstruments. Available at: http://www.chemsultants.com/testing-equipment-products/index.aspx (accessed: March 15, 2016).
